Engineered Wood Social

Posted in Industry News

8 UL-listed and Intertek-listed Fire-Rated Walls You Should Know

Finding the proper code-compliant fire-rated wall assembly for wood frame construction is a challenge. That challenge grows even more complicated depending on the project’s size and scale. 

In today’s building environment, it is key for architects, engineers and specifiers to maximize space while maintaining the cost effectiveness of the building’s construction and design. Additionally, AEC professionals must fully understand and comply with all fire protection guidelines applicable for mid-, low- and high-rise structures.

 With these design challenges in mind, LP® Building Products created LP® FlameBlock® Fire-Rated OSB sheathing for low and mid-rise wood and steel-framed structures. LP FlameBlock OSB sheathing allows fire-rated walls to be assembled faster than common alternatives, reducing labor costs while providing exceptional strength, durability and consistency. Additionally, LP FlameBlock panels offer Exposure 1 classification to withstand normal exposure to moisture during construction.

These UL-and Intertek-listed, fire-rated wall assemblies provide benefits to architects, engineers, builders, developers, contractors and even homeowners. LP FlameBlock OSB sheathing wall assemblies can reduce the number of components within a wall, reducing construction time, saving labor costs and increasing the flexibility of the design. The cost savings allow designers and builders to re-direct the funds into design elements which homeowners are seeking, increasing the value of the property. 

2 Hour-Rated Wall Assemblies:

UL Design No. U349 (2-hour wall; fire-rated from inside)

Application:

  • Commonly used in Type III load-bearing exterior walls

  Benefits:

  • Reduces dead load and wall thickness versus common alternatives
  • Reduces labor costs and construction time
  • Provides better substrate for securely fastening exterior facing
  • Allows fiberglass insulation

 

UL Design No. W408 (2-hour wall; fire-rated for 2 hours inside, 1 hour outside)

Application:

  • Commonly used in Type III load-bearing exterior walls close to property line

Benefits:

  • Reduces dead load and wall thickness versus common alternatives
  • Reduces labor costs and construction time
  • Fiberglass insulation can be used when standard brick is exterior facing
  • Provides better substrate for securely fastening exterior facing

           

 

UL Design No. W408 Extended (2 Hour Wall; fire-rated both sides, exterior fire rating supported by engineering evaluation report)

Application:

  • Commonly used in Type III load-bearing exterior walls close to property line

 Benefits:

  • Reduces dead load and wall thickness versus common alternatives
  • Reduces labor costs and construction time
  • Provides better substrate for securely fastening exterior facing

 

 

U350 Assemblies:

UL Design No. U350 (Type A) (2-Hour Partition Wall; fire-rated on both sides)

Application:

  • Commonly used in load-bearing partition walls in multifamily construction, including townhomes

Benefits:

  • Labor/material cost savings and reduction in dead load due to elimination of a layer of gypsum (vs. WP3820)
  • Cost-effective, space-saving alternative to area separation fire walls using shaft liner (where code-compliant)
  • Sound Transmission Class (STC) rating of 62

 

UL Design No. U350 (Type B) (2-Hour Partition Wall; fire-rated on both sides)

Application:

  • Commonly used in load-bearing partition walls in multifamily construction, including townhomes

 Benefits:

  • Labor/material cost savings and reduction in dead load due to elimination of a layer of gypsum (vs. WP3820)
  • Cost-effective, space-saving alternative to area separation fire walls using shaft liner (vs. UL375) 
  • Sound Transmission Class (STC) rating of 62

 

One Hour-Rated Wall Assemblies:

Intertek Listing LPB/WPPS-60-01 (1-hour wall; fire-rated from both sides)

Application:

  • Commonly used in 1-hour exterior walls along property line, including single-family construction 

Benefits:

  • Reduces dead load and wall thickness versus common alternatives
  • Reduces labor costs and construction time
  • Provides better substrate for securely fastening exterior facing

 

 

UL Design No. V311 (FlameBlock Plus 1-Hour wall; rated on both sides)

Application:

  • Intended for use in 1-hour exterior walls along property line, including single-family construction

Benefits:

  • Reduces dead load and wall thickness versus common alternatives
  • Reduces labor costs and construction time
  • Provides better substrate for securely fastening exterior facing
  • Allows brick, stucco, steel and fiber cement exterior facings

 

 

UL Design No. U348 (1-hour wall, Fire-rated from inside only)

Application:

  • Commonly used in Type V load-bearing exterior walls 

Benefits:

  • Reduces dead load and wall thickness versus common alternatives
  • Better substrate for securely fastening exterior facing
  • Allows fiberglass insulation
  • Provides better substrate for securely fastening exterior facing

 

Fire code compliance does not have to limit design flexibility, budget or schedule. LP FlameBlock fire-rated OSB Sheathing assemblies offer code-compliant solutions for a variety of building needs.  Check out the LP FlameBlock page to learn more about all eight of these fire-rated wall assemblies.

This information and the websites identified above are provided solely as a convenience to the reader. They are not intended to state or imply that the editors of Engineered Wood or LP Building Products sponsor, recommend, endorse or are affiliated or associated with the companies or products listed.