Menu
Industry Trends7 min

Looking to the Past for New Ways to Build Sustainability into Wetland Road Crossings

Since the early days of Canada’s timber trade, foresters have used “corduroy roads.” By laying logs down side by side–giving the appearance of corduroy fabric–they built paths over wet areas, providing bearing capacity of the road surface while allowing the water to flow through.

Forestry roads and poorly constructed water crossings can often interrupt the natural flow of water and the nutrients it carries. In the winter, water flowing through crossings can freeze, blocking the passage of water and creating a build-up of ice on top of the road bed. During the spring melt this ice dam can cause roads and crossings to wash out, creating a myriad of problems for foresters. The Sustainable Forestry Initiative® (SFI) was eager to support an environmental research project designed to develop and test new crossing techniques for forest roads that intersect with wetland environments. SFI partnered with Ducks Unlimited Canada and SFI program participants LP Canada Ltd., Weyerhaeuser and Spruce Products Ltd.

Ducks Unlimited Canada shared their wetland expertise with forestry professionals to plan and build roads in ways that conserve Canada’s critical boreal forest wetland ecosystems. The project focused on boreal forest wetlands in Manitoba and Saskatchewan. Ducks Unlimited Canada worked with engineers from FPInnovations, a nonprofit forest research center in Canada, and forest industry partners to come up with best practices for the construction of resource road wetland crossings.

After many workshops and field trips that focused on understanding wetland hydrology and construction best management practices for forestry roads and crossings that best conserve boreal wetlands, Ducks Unlimited Canada and its forestry partners decided to reinvent the corduroy road crossing.

First, it was important to determine the type of wetland the company would have to cross in order to access timber. For instance, water in bogs is stagnant; in swamps, water flow fluctuates; and water can flow very slowly in fen wetland types. Depending on the wetland type and anticipated water flows, one or several culverts are added to increase water flow capacity and geotextile fabric is used to provide for roadbed separation and support. The root mats and stumps are left intact to further stabilize the road bed. Fabric is placed over the corduroy prior to placing the road gravel to prevent dirt from plugging the corduroy or entering the water. Although the basic crossing design remains the same, minor adjustments are made depending on the wetland type and anticipated flow dynamics of the wetland being crossed. The result is almost like a suspended road that allows water to flow through.

In 2014, the partners produced a wetland field guide and operational handbook that allows foresters to build better roads in the boreal. It helps them classify wetlands and contains construction schematics. Armed with this information, foresters can access timber while at the same time leaving the wetlands intact. Supported with funding from the SFI, the wetland field guide and handbook for forest road wetland crossings are documents that help resource managers identify wetlands in the field and provide practical guidance on how to cross different wetland types.

The project is an excellent example of why SFI launched the conservation grant program in 2010; it brings together conservation and forest engineering expertise, fosters collaboration, and builds knowledge to improve practices and protect special areas. LP Canada Ltd.’s support and continued partnership helps ensure the continued success of these objectives. This project is one of more than 60 SFI Conservation and Community Partnership grants awarded since 2010. Since then, SFI has provided more than $1.9 million to foster research and to pilot efforts to better inform future decisions about our forests. When leveraged with project partner contributions, that total investment exceeds $7.1 million.

The research, which began in 2011, is now being expanded to a national scale. This project will provide information on forest resource roads and wetland crossings in order to influence best practices on millions of acres of forestland certified to the SFI standard across Canada and the United States. 

Continue Reading
Industry Trends5 min

Tighter Building Envelopes

Overall, improvements in building envelopes have helped homeowners benefit from greater protection against moisture. Builders are able to create more energy-efficient homes overall due to these developments. However, when the exterior envelope doesn’t allow a structure to breathe, any moisture that gets trapped inside simply rots—causing more problems than intended. What is the solution to needing a tight building envelope that allows for proper airflow? Symbiotic materials, such as the LP Structural Solutions portfolio of products, provide an answer.

Continue Reading
News & Stories6 min
On the Jobsite with LP Technical Sales Manager – Oscar Trejo

We’re joining Oscar Trejo, LP Technical Sales Manager, for a typical day on the job sharing his knowledge about one of the most durable siding solutions available—LP® SmartSide® Trim & Siding. Trejo dedicates his time to providing construction training for building professionals, assisting on the jobsite, and leading his team at LP.

News & Stories4 min
HOW IS THE PAST IMPACTING THE FUTURE OF THE BUILDING INDUSTRY?

As a leader in building solutions, LP Structural Solutions is consistently moving in the direction of greater resiliency. Each innovative building solution is viewed through that lens, as well as how it can help achieve LP’s overall goal of Building a Better World™. But why this direction? What led LP to focus on resilience in construction? Craig Miles, Director of OSB Sales & Marketing, explores how past trends inform LP’s work on modern building techniques today.

Business Advice5 min
PREPARING FOR PRIME SIDING SELLING SEASON

Coming off an unprecedented year, the busiest season for selling siding is almost underway! COVID-19 is still a significant consideration as you attempt to move forward with your siding business while taking learnings and challenges from the pandemic into consideration. We talked with Erik Perkins of Perkins Builder Brothers to get insight straight from the jobsite about COVID-19’s impact, tips for prepping for a new season, and more. Read on to see how LP can support you with one of the most durable siding options out there as your business ramps up!